Quickart M3 E Quiz - Dane Technologies QUICKART M3 Owner's Manual

Electric utility machine
Table of Contents

Advertisement

Your Name: ______________________ Date: _________ Store Location: ______________
10. The approximate maximum number of shopping carts that should be pushed by the QuicKART
is:
A. 10
11. While directing a chain of carts using the QuicKART, the operator should walk to the side of the
lead cart and hold it back to prevent the carts from separating and also enable them to be
stopped promptly.
12. The QuicKART should be used to push a chain of shopping carts into the cart room.
True _____ False _____
13. When approaching customers or employees with a chain of carts being pushed by the
QuicKART proceed toward them at your normal operating speed. True _____ False _____
14. During manual operation, the brake on the QuicKART is applied by releasing the
throttle (nudge switch).
15. Before beginning to use the QuicKART, be sure to check (select only one)
A. The condition of the tires.
B. Battery charge level is greater than 20%.
C. Brake for proper operation.
16. When manually operating the QuicKART, it's acceptable to operate several carts attached to
the front of the machine. True _____ False ________
17. The QuicKART can be driven off curbs and on grass surfaces. True _____ False _____
18. It is OK to leave the QuicKART unattended without removing the key.
True_______ False_______
A
G
C
----------------------------------------------------------------------------------------------------------------------
STOP
To be completed by trainer.
Observe the associate perform the following tasks and indicate if he/she displayed acceptable operation.
For successful completion of training associate must display ability to properly perform all three operating
tasks:
Control Panel Use
Ok __
Unacceptable __
Trainer: ___________
If performance training was not successfully completed, do not allow the associate to operate machine on
their own until retrained and re-evaluated. If re-evaluated, make note below.
Note:
Dane Technologies, Inc.
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com

QUICKART M3 E QUIZ

B. 20
True _____ False _____
True _____ False _____
E
H
F
D
Manual Operation of QuicKART
Ok __
Unacceptable __
Date:
QuicKART
C. 30
D. 50
D. Flashing light is working.
E. All of the above.
For each item below, identify its location on
the control panel on the left and write the
appropriate letter next to the item.
ITEM DESCRIPTION
10. Nudge Switch
11. Key Switch
12. Battery Level Meter
13. Status Light
14. Horn
15. Emergency Shut-Off
16. Programming Button
B
Cart Collection in Remote
Ok __
970-047
Number Correct: _______
PERFORMANCE TRAINING
Unacceptable __
Owners Manual
B 2-9-09
REV
Letter
58

Advertisement

Table of Contents
loading

Related Products for Dane Technologies QUICKART M3

This manual is also suitable for:

Quickart m3 eQuickart m3 hd

Table of Contents