Dane Technologies QUICKART M3 Owner's Manual page 42

Electric utility machine
Table of Contents

Advertisement

To Get Carts Inside:
Back-Up Machine:
Explain How to Switch
To Forward:
New Cart Collection Cycle:
Disconnect Cart from
Cart Coupler:
Charging:
PERFORMANCE TRAINING:
Hands-On Training:
FOLLOW-UP:
Dane Technologies, Inc.
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com
stop using the QuicKART and proceed with manually
pushing a maximum of ten (10) at time into the cart
room. You can still use the QuicKART to advance the
chain of shopping carts up to the cart room doors.
To back up the QuicKART, rotate the keyswitch to
manual, rotate the RH thumb wheel throttle counter-
clockwise to back up [M3, M3 HD]. For the M3 E press
the side of the nudge switch toward the strobe tower.
Looking backward, back it up until you can proceed
forward.
To go forward, rotate the RH thumb wheel throttle
clockwise. [M3, M3 HD]. For the M3 E press the side of
the nudge switch toward the carts.
You are now ready to perform another cart collection
cycle.
Once we have gotten all the carts in the cart room and
are done for the shift, disconnect the cart from the cart
coupler using the reverse of the procedure used to
connect it.
(Show where QuicKART is parked and how to charge
the batteries.)
Have each trainee go through an entire cart collection
process while you observe to be sure each person can
operate the machine properly. If unable to perform the
process competently, show them the process once again
and then recheck. Use the Performance Training
Check-Off on the bottom of the quiz to document results
of each trainee's operation of the QuicKART.
Check the quiz and ensure each associate passed with
an 80% score or better. If not, those associates need to
repeat the training. Answering 13 or more questions
correctly is a score of 80% or better.
Be sure you record on the bottom of the associate's quiz
whether they displayed the ability to operate the
QuicKART based on their hands-on training.
Place quiz in associate's personnel file.
QuicKART
Owners Manual
970-047
B 2-9-09
REV
55

Advertisement

Table of Contents
loading

Related Products for Dane Technologies QUICKART M3

This manual is also suitable for:

Quickart m3 eQuickart m3 hd

Table of Contents