To Set Up Daylight Saving Time; Control Leds - TP-Link RE105 User Manual

Chapter 5
5. 1. 2.

To set up Daylight Saving Time:

1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Settings > System Tools
section.
3. Select Enable Daylight Saving
4. Select the Start and
zone.
5. Click SAVE.
5. 2.

Control LEDs

The LEDs of the extender indicate its activities and status. You can enable the Night
Mode feature to specify a time period during which the LEDs are off.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Settings > Advanced Settings
• To Turn the extender's LEDS on or off:
1. Locate the LED Control
• To specify a time period when LEDs are off:
1. Enable Night Mode.
2. Specify a LED Off
3. Click SAVE.
> Time Settings
Time.
End date and time of the daylight saving time at your local time
> LED
section, enable or disabled
time period, and the LEDs will be off during this period.
and locate the Daylight Saving Time
Control.
LED Status.
Manage Your Extender
27