Related Manuals for Martin Lishman Protimeter Balemaster
Summary of Contents for Martin Lishman Protimeter Balemaster
- Page 1 Martin Balemaster Lishman GRN6165 Instruction Manual Professional Crop Moisture Measurement Distributed by Martin Lishman Ltd Tel: + 44 (0)1778 426600 www.martinlishman.com...
- Page 2 Care and Maintenance Daily Care Keep the meter in its protective case. Clean and dry the probe after every reading. The point of the Bale Moisture and Bale Temperature Probes is very sharp and should be handled with due care. Keep covered when not in use. When removing the probe from the bale, avoid twisting the handle.
- Page 3 Product Overview Introduction The Protimeter Balemaster measures the moisture level of baled products such as straw and hay. It is calibrated for wheat straw and can be used to take relative measurements of other baled products. When assessing the moisture of bales it is recommended to use an ...
- Page 4 Taking a Moisture Reading Before every reading Ensure the probe is clean and dry. Taking a reading Connect the moisture probe to the meter. Press and release . The meter will show standby mode: Push the moisture probe into the bale. A precise numeric reading, as well as colour LED and moisture range description will show as follows: 8.5 to 15%...
- Page 5 Taking a Moisture Reading Other functions HOLD - this is available if readings need to be frozen during measurement. Activate as follows: Press during measurement. HOLD will be displayed. Withdraw the probe from the bale and the reading will remain on the display. Reference Measurement - this is ideal for when testing a large number of bales.
- Page 6 Meter Settings Default Settings The Balemaster is supplied ready-to-use with moisture descriptions, buzzer tone and backlight on, auto-off time set at 2 minutes and temperature in °C. To alter default settings enter Settings Mode: With the meter switched off, press and hold and then press .
- Page 7 Temperature Probes Optional Grain and Bale Temperature Probes Bale Temperature Probe 600mm (pictured right) (Part No. GRN6154) T-Bar stainless steel fast response bale temperature probe used with Balemaster check temperature of bales of hay and straw. Suitable for other baled products. Grain Temperature Probe 1.5m (not pictured) (Part No.
- Page 8 To claim under warranty, the complete unit or part should be returned, at the claimant’s expense, to Martin Lishman Ltd with a written explanation of the problem. Should there prove to be a defect or malfunction caused by faulty parts or workmanship, it will be repaired or replaced and returned to the claimant without charge.
Need help?
Do you have a question about the Protimeter Balemaster and is the answer not in the manual?
Questions and answers