Bajaj GT110X BS VI Owner's Manual page 25

Periodic Maintenance Information-
0.7 to
0.8 mm
Drive Chain
Slackness
• Chain top edge
to be kept
between two
marks during
chain slackness
adjustment.
• Chain slackness to be adjusted whenever
required.
• Std. Chain slackness : 20 ~ 30 mm
• Marking on chain adjusters should be
identically positioned on both sides.
Spark Plug
• Remove spark
plug by using plug
spanner.
• Clean spark plug.
• Adjust the gaps if
incorrect by
bending outer
electrode carefully.
Std. Chain slackness :
20~30 mm
Spark Plug, Drive Chain
Chain Adjuster LH
Drive chain must be cleaned & lubricated as per
periodic maintenance schedule.
Drive Chain (Non sealed type )
• Non sealed type chain should be removed &
cleaned by Nylon brush & Kerosene / diesel in
chain cleaning stand.
• It should be lubricated by SAE 90 grade oil.
Drive Chain Cleaning
21
Chain Adjuster RH
Drive Chain Lubrication