Assembly - Bissell POWERTRAK 1808 Series User Manual

Assembly

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
1
3
5
NOTICE
Brushroll continues to turn while product is turned on and handle is in upright position. To
avoid damage to carpet, rugs, furniture and flooring, avoid tipping vacuum or setting it on
furniture, fringed area rugs, or carpeted stairs during tool use.
NOTICE
With brushroll on, do not allow cleaner to sit in one location for an extended period of time,
as damage to floor can result.
Insert handle into
vacuum base until
you hear a "click".
Push hose end into
vacuum base until
you hear a "click".
2
4
Wrap the hose up and
around, then slide end
into vacuum base.
Store TurboBrush® tool on front in
holder.
Store Crevice Tool inside Extension
Wand and store Extension Wand
on side of vacuum.
Store the Combination Dusting/
Upholstery Tool on opposite side.
Push lower cord
wrap in, aligning
two tabs, then turn
clockwise (down)
to lock into place.
www.BISSELL.com
5