Samsung SM-F926B Service Manual page 25

5. Disassembly and Assembly
5-2-12. SUB PBA Remove
Step 1
5-2-13. Vibrator Remove
Step 1
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorisation is strictly prohibited.
Using the separator stick, gently remove the SUB PBA
assembly.
(Lightly push up on both separator grooves)
When removing the Charging assembly, turn it over and
detach and remove the Front camera.
Point the lens upwards and put the Front camera on the ESD
mat.
Insert the tweezers into the separator groove and gently lift up
the motor, remove it.
[Caution]
- Be careful to not damage the Vibrator.