Samsung SM-F926B Service Manual page 23

5. Disassembly and Assembly
5-2-8. REAR BTM Remove
Step 1
5-2-9. SPK BTM Remove, SPK TOP Remove
Step 1
Step 2
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorisation is strictly prohibited.
After disconnecting the Rear MID, place the tweezers in the
separator groove in the lower left side of the Rear part, and
detach the Rear lower part from the device.
[Caution]
- Be sure to not tear the Wireless charging module.
Check the 13 different points where there are screws. Remove
the 13 screws with a cross-head screwdriver.
- When removing the screws in the blue box, be careful to not
damage the battery.
Place the tweezers in the separator groove of the Sub rear
TOP and BTM, and remove the Rear.