Samsung SM-F926B Service Manual page 18

5. Disassembly and Assembly
Place the tweezers in the right separator groove of the Top
rear, tilting the Top/Middle rear so it is slanted more than 90
degrees.
[Caution]
- Be careful to not damage the Wireless
charging module connector.
Step 3
[ Bottom ]
After disconnecting the rear MID, place the tweezers in the left
separator groove of the bottom part of the Rear,
And separate the Rear's bottom part.
[Caution]
- Be careful to not tear the Wireless
charging module.
[Caution]
Be careful to not tear any of the connected components near
the Wireless charging module.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorisation is strictly prohibited.