Steps
1. Locate the notch on the 2280 solid-state drive.
2. Align the notch on the 2280 solid-state drive with the tab on the M.2 card slot.
3. Slide the 2280 solid-state drive into the M.2 card slot on the system board.
4. Replace the single (M2x3) screw that secures the 2280 solid-state drive to the system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Graphics card
Removing the graphics card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the graphics card and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
25