General Information; Technical Specifications - Theben TIMEGUARD UDSS2PIR Quick Start Manual

1. General Information

These instructions should be read carefully and retained for
further reference and maintenance.
Timeguard reserve the right to alter these instructions
Note:
at any time. Up to date instructions will always be available
for download at www.timeguard.com
2. Safety
• Before installation or maintenance, ensure the mains supply
to the luminaire is switched off and the circuit supply fuses
are removed or the circuit breaker turned off.
• It is recommended that a qualified electrician is consulted or
used for the installation of this luminaire and install in
1
accordance with the current IEE wiring and Building
Regulations.
• Check that the total load on the circuit including when this
luminaire is fitted does not exceed the rating of the circuit
cable, fuse or circuit breaker.
• To clean use a clean dry cloth only. Do not use liquid cleaners.

3. Technical Specifications

• Mains Suppply:
• Class Protection:
• IP Rating:
• Operating Temperature:
• PIR Switching Capacity:
220-240V AC 50Hz
Class I
IP44
0˚ to 40˚C
x2 35W Halogen or
x2 15W LED