General Information; Safety; Technical Specifications - Theben TIMEGUARD LEDBHR25WPIR Installation And Operating Instructions Manual

1. General Information

These instructions should be read carefully and retained for further
reference and maintenance.
Timeguard reserve the right to alter these instructions at any time.
Note:
Up to date instructions will always be available for download at
www.timeguard.com/pdf-instructions

2. Safety

• Before installation or maintenance, ensure the mains supply to the
luminaire is switched off and the circuit supply fuses are removed or the
circuit breaker turned off.
• It is recommended that a qualified electrician is consulted or used for the
installation of this luminaire and install in accordance with the current
IEE wiring and Building Regulations.
1 • Check that the total load on the circuit including when this luminaire is
fitted does not exceed the rating of the circuit cable, fuse or circuit
breaker.
• To clean use a clean dry cloth only. Do not use liquid cleaners.

3. Technical Specifications

• Mains Supply:
• This luminaire is of class I construction and must be earthed
• IP Rating:
• Operating Temperature:
• Standby Power:
• PIR Detection Range:
• Detection Angle:
• PIR Sensitivity Adjustment:
230V AC 50Hz
IP65
0˚ to 40˚C
<0.5W
6m at a 3m mounting
height
100˚ (Fixed)
Yes: (Detection distance)
0.5m to 6m