RAM (system memory)
The capacity of the RAM (system memory) must be more than sufficient to satisfy the
operating system requirements.
HDD (Hard Disk)
The capacity of the HDD must be more than sufficient to satisfy the operating system re-
quirements.
In addition to the memory space required to run the operating system, about 50 MB or
more of additional memory space is required to run the program.
Necessary PC peripheral interfaces
USB port (USB 1.1 / USB 2.0)
Required Cable
Programming Cable SCU-35
Before using the SCU-35 Programming Cable, install the designated driver on
the computer.
Trademarks
Microsoft
, Windows
®
trademarks in the United States and other countries.
The flow sequence of the Memory Programmer
The procedure when using Memory Programmer for the first time is as follows:
Installing the SCU-35 driver software (Page
Installing the Memory Programmer (Page
About Memory Programmer (Page
FT-65R/E FT-25R/E Memory Programmer
, Windows
7, Windows
®
®
Basic Operation (Page
8.1. and Windows
®
↓
↓
↓
3
10, are registered
®
4)
7)
9)
12)