Camera Controlled By Wan; Setup Ipcontrolled By Dynamic Dns; Dynamic Dns Visit Camera; Vlc Stream Media Player Monitor - Prestel 4K-PTZ412A User Manual

4K Video Conference CameraUser Manual
If user first time use this camera by internet
(only for new user),must install a player
software (VLC). Please go to VLC website
http://www.videolan.org/vlc/#download and
Install VLC (player software).After installation,
login again, will show as above.

6.5 Camera Controlled by WAN

6.5.1 Setup IPControlled by Dynamic DNS

Two dynamic DNS:Dyndns.org, 3322.org.
Router Port Mapping:
Take Tenda router for example, enter the
Router Home Page
select"Advanced"- "Virtual Server", add a new
port number in "Ext Port", add a new port
number in "Int port", put camera IP address to
"Internal IP", then select "Save", shown as
below:
(interface page),

6.5.2 Dynamic DNS Visit Camera

Set domain name to camera,setup the
parameter,then dynamic DNS can access
camera.Access link: http://hostname: port
number. Forexample,setup host computer
name: youdomain.f3322.org, the camera port
number is 89, the access link should
behttp://youdomain.3322.org:89.
If the camera
unnecessary to input port number, use host
name can access camera directly.

6.5.3 VLC Stream Media Player Monitor

Visit VLC Media Server Procedure
Step 1 Open VLC media player.
Step 2 Click "Media > Open Network Stream",
or click "Ctrl+N"; as below:
13
port default is 80,then