1. Manuals
  2. Brands
  3. Prestel Manuals
  4. IP Camera
  5. HD-PTZ512HM
  6. User manual

Prestel HD-PTZ512HM User Manual

Hd video conferencing camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Prestel HD-PTZ512HM
HD Video Conferencing Camera
User Manual
V1.0
(English)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HD-PTZ512HM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Prestel HD-PTZ512HM

Summary of Contents for Prestel HD-PTZ512HM

  • Page 1 Prestel HD-PTZ512HM HD Video Conferencing Camera User Manual V1.0 (English)
  • Page 2 Preface Thanks for using this HD Video Conferencing Camera. This manual introduces the function, installation and operation of the HD camera. Prior to installation and usage, please read the manual thoroughly. Precautions This product can only be used in the specified conditions in order to avoid any damage to the camera: ...

  • Page 3: Supplied Accessories

    Note  Electric Safety Installation and operation must accord with electric safety standard.  Caution to transport Avoid stress, vibration and soakage in transport, storage and installation.  Polarity of power supply The power supply of the product is +12V, the max electrical current is 2A .Polarity of the power supply plug drawing as follows.

  • Page 4: Quick Start

    Quick Start Step1. Please check connections are correct before starting Step2.Connect the power on the rear panel of camera, the camera power indicator on the front panel Step3. The camera starts to initialize after power-on, Pan-Tilt rotate to the maximum position of upper right, then both horizontal and vertical to the middle position, the motor stops running, initialization complete.
  • Page 5 Features  Completely New Look Designed with worm gear drive, completely new look, mini size, two colors for choosing from.  1080P Full HD Apply Panasonic's 1/2.7 inch, 2.07 million effective pixels high quality HD CMOS sensor, can reach maximum 1920 x 1080 high resolution and achieve quality image. ...

  • Page 6: Product Specification

    Product Specification Prestel HD-PTZ512HM Model Name HD Video Conferencing Camera Camera Sensor 1/2.7 inch, CMOS, Effective Pixel: 2.07M Scanning Mode Progressive Lens 12x, f3.5mm ~ 42.3mm, F1.8 ~ F2.8 Digital Zoom 16x (optional) Minimal Illumination 0.05 Lux @ (F1.8, AGC ON)
  • Page 7 First Stream resolution 1920x1080,1280x720,1024x576,960x540,640x480,640x360 1280x720,1024x576,720x576,720x408,640x360,480x270,320x240,3 Second Stream resolution 20x180 Video Bit Rate 128Kbps ~ 8192Kbps Bit Rate Type Variable rate, Fixed rate 50Hz: 1fps ~ 50fps, 60Hz: 1fps ~ 60fps, 720p120: 120fp(supported Frame Rate by S Model only), 640x480p240: 240fps(Supported by S Model only, optional) Audio encode standard Audio Bit Rate...

  • Page 8: Ir Remote Controller Explanation

    IR Remote Controller Explanation 1. Standby Button Press this button to enter standby mode. Press it again to enter normal mode. (Note: Power consumption in standby mode is approximately half of the normal mode) 2. Position Buttons To set preset or call preset 3.
  • Page 9 Press [MANUAL] adjust the focus on the center Note: If a light behind the subject, the subject will of the object manual become dark. In this case, press the backlight ON / MANUAL button, and adjust it with [Far] (Focus OFF button.
  • Page 10 RS-232 Interface Camera Windows DB-9 1.DTR 1.CD 2.DSR 2.RXD 3.TXD 3.TXD 4.GND 4.DTR 5.RXD 5.GND 6.GND 6.DSR 7.IR OUT 7.RTS 8.NC 8.CTS 9.RI Camera Mini DIN Function 1.DTR 1.DTR 2.DSR 2.DSR 3.TXD 3.TXD 4.GND 4.GND 5.RXD 5.RXD 6.GND 6.GND 7.IR OUT 7.NC 8.NC 8.NC...

  • Page 11: Visca Network Configuration

    VISCA Network Configuration...

  • Page 12: Serial Communication Control

    Serial Communication Control In default working mode, the camera is able to connect to a VISCA controller with RS232C serial interface. ➢ RS232 Communication Control: The camera can be controlled via RS232 ,the parameters of RS232C are as follows: Baud rate: 2400/4800/9600 bit/s. Start bit: 1 bit.

  • Page 13: Command List

    Command List Ignore Note: The camera serial standard VISCA/Pelco-D/Pelco-P, if the need for the secondary development, According to standard protocol to control the camera. If you need VISCA/Pelco - D/Pelco - P protocol command list in detail, please contact the manufacturer.

  • Page 14: Menu Setting

    Menu Setting EXPOSURE 1.MENU Mode Auto Press [MENU] button to display the main ExpCompMode menu on the normal screen, using arrow button to move the cursor to the item to be set. Press the Backlight [HOME] button to enter the corresponding Gain Limit sub-menu.
  • Page 15 Bright: Intensity control, Optional items: WB-Mode: White balance mode. Optional 00~17. (Effective only in Bright mode) items: Auto, 3000K/Indoor, 4000K,5000K/ Anti-Flicker Flicker: Anti-flicker. Optional Outdoor, 6500K-1,6500K-2,6500K-3,One Push, items: Off, 50Hz, 60Hz (Effective only in Auto, Manual Bright mode) RG: Red gain. Optional items: 0~255 （Effective only in Manual mode）...
  • Page 16 5.P/T/Z IMAGE P/T/Z Luminance SpeedByZoom Contrast AF-Zone Center Sharpness AF-Sense High Flip-H L/R Set Flip-V Display Info B&W-Mode Image Freeze Gamma Default Digital Zoom Style Clarity Select Item Select Item Change Value Change Value [Menu] Back [Menu] Back Luminance: Brightness adjustment. Optional SpeedByZoom: The depth of field scale items: 0 ~ 14 switch, Optional items: On, Off...
  • Page 17 following figure. SETUP NOISE REDUCTION Language NR2D-Level DVI Mode NR3D-Level Lens Type1 D-HotPixel Select Item Select Item Change Value Change Value [Menu] Back [Menu] Back Language: menu language, Optional items: NR2D-Level: 2D noise reduction. Optional EN, Chinese, Russian items: Off, Auto, 1 ~ 5 DVI Mode, Optional items: DVI, HDMI NR3D-Level: 3D noise reduction.
  • Page 18 9.RESTORE DEFAULT COMMUNICATION SETUP Move the cursor to the Restore Default item Protocol VISCA in the main menu and press [home] button, V_Address RESTORE DEFAULT menu appears, as shown in the following figure. V_AddrFix Net Mode Serial RESTORE DEFAULT Baudrate 9600 Restore? Select Item...

  • Page 19: Network Function

    Network Function Method 1: press * and # and 4 on remote 1 Operating Environment controller one by one, the camera IP address will Operating System: Windows 2000/2003/XP/ be shown on screen. vista/7/8 Method 2: connect camera to PC with Network Protocol: TCP/IP ethernet cable, use "upgrade_En.exe"...
  • Page 20 Method 2: Open "upgrade_En.exe", change IP and click "Set". After modified, IP Camera be restart. NOTE！ If user first time use this camera by internet (only for new user),must install a player software (VLC). Please NOTE! websidehttp://www.videolan.org/vlc,download Install IP camera default IP address"192.168.100. (player software).After 88",user "admin", password "admin".
  • Page 21 Input URL address: 5.2 Dynamic DNS visit camera rtsp://ip: port number/1 (First stream); Set domain name to camera, setup the rtsp://ip: port number/2 (Second stream). parameter, then dynamic DNS can access camera. NOTE！ Access link: http://hostname :port number For example, setup host computer...
  • Page 22 image Parameter setup: with function buttons 1) PTZ direction control box: Up, down,left, A. Video viewing window right, home oblique button as above Video viewing window must be same as 2) Rate: Vertical speed can be chosen as 1 ~ 24, video resolution, the bigger the resolution is, the horizontal direction at the rate of 1 ~ 20.
  • Page 23 the image page.PTZ direction control box: and Dial priority three formats. Up/down button select menu. and the home 2) Encode Protocol button enter the submenu, the left/right button Support H.264 , H.265and MJEPG three modify the submenu. After the menu to be formats.
  • Page 24 8) Bit Rate control shows the corresponding numerical. Default 7. Code stream control way: 4) Sharpness Constant bit rate: video coder will be coding Sharpness0~15, slider control, on the right according to preset speed shows the corresponding numerical. Default 2. Variable bit rate: video coder will adjust the 5) Hue speed based on preset speed to gain the best image...
  • Page 25 4) Input Type Modify password and click the "apply" button line in only to the login page, press "cancel" button to cancel 5) Input VolL password change. The volume of the left channel 6.6 Network Setting, please click "Network" 6) Input VolR The volume of the right channel 7) ADTS Options Optional items: On, Off...
  • Page 26 Network camera support RTSP protocol, use the VLC tools broadcast. C. PTZ Port Support PTZ protocol, default port: 5678. 3) Control Protocol Setting Setting camera control communication 7 Download the Network upgrade program protocol, include Visca address, Pelco-D address, If you need the camera upgrade program, Pelco-P address.

  • Page 27: Maintenance And Troubleshooting

    Maintenance and Troubleshooting Camera Maintains  If camera will not be used for a long time, please turn off the power switch, disconnect AC power cord of AC adaptor to the outlet.  Use soft cloth or tissue to clean the camera cover. ...
  • Page 28 2. Disconnect IP Camera with network, IP Camera and PC are connected, according to the proper operations to re-set the IP address. 3. Check the server's IP address and subnet mask and gateway address. 4. MAC addresses conflict. 5. Web port is occupied by other devices. ...

Table of Contents