Advertisement
1. The appliance has a filter replacement remainder
filter should be replaced.
simultaneously to clear the accumulated use time of the
timing starts again.
Troubleshooting
phenomenon
The product
emits abnormal
noise.
Rurification
capacity is
reduced.
Remote
controller fails
The appliance
automatically
enters sleep
mode in non-
dark conditions.
17
causes
make sure it is plugged into the
correct place
There is no electricity in the socket
Change to another socket and try to plug in again.
correctly installed.
The appliance may operate
under overload for
inlet or outlet is obstructed.
Remove and replace the filter by
referring to the previous detailed
life comes to an end.
has come to an end.
1. Replace the battery.
2. The remote controller is
2. Move it closer to the appliance.
too far from the appliance.
Check if there any foreign
matter on the switch.
Remove the foreign matter.
18
Advertisement
