Titan TT-GD520 Instruction Manual page 8

5. For safe operation
-----------------------------------------------------------------------------------------------------------------------------------------
2. To avoid noise complaints, in general,
operate product between 8a.m. and 5p.m.
on weekdays and 9a.m. to 5p.m. weekends.
NOTE
Check and follow the local regulations as to
sound level and hours of operations for the
product.
■ BEFORE STARTING THE ENGINE
1. The area within a perimeter of 50 feet (15m)
of the person using the product should be
considered a hazardous area into which no one
should enter. If necessary, yellow warning rope,
warning signs should be placed around the
perimeter of the area. When work is to be
performed simultaneously by two or more
persons, care should also be taken to constantly
look around or otherwise check for the presence
and locations of other people working so as to
maintain a distance between each person
sufficient to ensure safety.
2. Check the condition of working area to avoid
any accident by hitting hidden obstacles such as
stumps, stones, cans, or broken grass.
IMPORTANT
Remove any obstacle before beginning work.
3. Inspect the entire unit for loose fasteners and
fuel leakage. Make sure that the driller is
properly installed and securely fastened.
■ STARTING THE ENGINE
1. Keep bystanders and animals at least 50feet
(15m) away from the operating point. If you are
approached, immediately stop the engine.
2. The product is equipped with a centrifugal
clutch mechanism, so the driller begins to rotate
as soon as the engine is started by putting the
throttle into the start position. When starting the
engine, place the product onto the ground in a
flat clear area and hold it firmly in place so as to
ensure that neither the driller nor the throttle
come into contact with any obstacle when the
engine starts.