Related Manuals for Bavaria BCD 18/1 Li
Summary of Contents for Bavaria BCD 18/1 Li
- Page 1 Anleitung_BT_CD_18_1_Li_SPK1:_ 10.03.2010 15:34 Uhr Seite 1 Original operating instructions Cordless Drill 18/1 Li Art.-Nr.: 45.135.82 I.-Nr.: 11013...
- Page 4 Caution Read the operating instructions to reduce the risk of injury. Wear ear-muffs. The impact of noise can cause damage to hearing. Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the device can cause loss of sight. Wear a breathing mask.
-
Page 5: General Safety Rules
1. General Safety Rules Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing WARNING! Read all instructions Failure to follow all protection used for appropriate conditions will instructions listed below may result in electric shock, reduce personal injuries. -
Page 6: Additional Safety Rules
5. Service Do not throw battery packs into an open fire. Have your power tool serviced by a qualified There is a risk of explosion! repair person using only identical replacement Do not ignite the battery pack or expose it parts. -
Page 7: Proper Use
Do not over-charge batteries. Do not When handling batteries be aware of exceed the maximum charging times. These electrostatic discharge: Electrostatic charging times only apply to discharged discharges cause damage of the electronic batteries. Frequent insertion of a charged protection system and the battery cells. or partly charged battery pack will result in Avoid electrostatic charging and never touch overcharging and cell damage. -
Page 8: Technical Data
5. Technical data The specified vibration value can be used for initial assessment of a harmful effect. Voltage supply 18 V d.c. Keep the noise emissions and vibrations to a Idling speed 0-350/0-1200 rpm minimum. Torque settings 19 + 1 •... - Page 9 7.2 Torque setting (Fig. 4) Indicator status Explanations and actions The tool is fitted with a mechanical torque selector. Green The torque for a specific size of screw is selected with the torque selector (1). The correct torque depends Flashing Ready for use on several factors: The charger is connected to the...
-
Page 10: Disposal Of Batteries
7.8 Screwdriving and can therefore be reused or can be returned to We recommend using self-centering screws (e.g. Torx the raw material system. screws, recessed head screws) designed for reliable working. Be sure to use a bit that matches the screw in The unit and its accessories are made of various shape and size. -
Page 11: Guarantee Certificate
Anleitung_BT_CD_18_1_Li_SPK1:_ 10.03.2010 15:35 Uhr Seite 71 The guarantee provided in this Guarantee Certificate is given by Einhell Australia Pty Limited ACN 134 632 858 of 6/166 Wellington Street, Collingwood, Victoria (Telephone number 1300 922 271) (Einhell Express Guarantee). CERTIFICATE GUARANTEE Dear Customer, All of our products undergo strict quality checks. - Page 12 EH05/2013(01)
Need help?
Do you have a question about the BCD 18/1 Li and is the answer not in the manual?
Questions and answers