Table of Contents
Advertisement
Appendix B
SYNC:
PROGRAM:
DISPLAY MEMORIES/STATUS:
AUTOSYNC ON/RESET TO 50:
AUTOSYNC OFF:
TIMEOUT (8 MINUTES) ON:
TIMEOUT OFF:
DELETE MEMORIES/RESET:
Appendix C
HANDHELD CONTROL DOES NOT FUNCTION
Battery bad or set for wrong handheld type (Appendix A).
UNIVERSAL HANDHELD DOES NOT OPERATE CERTAIN FUNCTIONS (eg. UP/DOWN)
If supplied remote control is OK, try all available Pioneer
codes. Universal remote may not be fully compatible.
UNIT DOES NOT TRACK CORRECTLY
Check power frequency 50/60 Hz setting (Appendix A).
POSITION ACCURACY SEEMS DEGRADED
Perform SYNC function.
ANTENNA DOES NOT MOVE, BUT CONTROLLER INDICATES MOVEMENT
Check the wiring between the controller and the drive unit.
Appendix D
Using the rotator from any room in the house.
The following methods and products are suggested though not endorsed by Channel Master
a. A UHF universal remote with a UHF to infra-red converter in the same room as Model 9537.
or :
b. An infra-red to UHF converter in each room where operation is desired, plus a UHF to infra-red
converter in the same room as Model 9537.
Handheld Remote Control Command Summary
Common Problems
00
# # (# = 01-69)
99
98
98
97
97
91
®
cable box and Pioneer
7
®
CD player
®
:
Hide quick links:
Advertisement
Table of Contents
