Troubleshooting - Monogram ZTW900S Owner's Manual

TROUBLESHOOTING

Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem
Warming drawer will not
work
Drawer does not slide
smoothly or drags
Excessive condensation
No heat in the PROOF
setting
Food dries out
49-2000766 Rev. 0
Possible Cause
A fuse in your home may be blown or the circuit
breaker tripped.
Warming drawer not plugged in.
Controls improperly set.
Drawer over-loaded or load unbalanced.
Liquid in warming drawer.
Uncovered foods.
Temperature setting too high.
Incorrect Moisture Selector setting.
Room temperature may prevent the thermostat
from tripping on.
Moisture escaping.
What To Do
Replace the fuse or reset the circuit breaker.
Plug in.
See the Using the warming drawer section.
Fully extend the drawer and push it all the way in.
See the Care and cleaning section.
Reduce weight to less than 50 pounds.
Redistribute drawer contents.
Remove liquid.
Cover food with lid or aluminum foil.
Reduce temperature setting.
Set the Moisture Selector to the open vent setting
to allow venting.
Turn the knob to LOW then back to PROOF.
Cover food with lid or aluminum foil.
11