Table of Contents
Advertisement
When connecting T/B, after removing the
sheath referring to the guide as shown
on the picture, make sure to connect by
inserting a short-protecting sleeve into
the O-ring or U-terminal.
<Sheath-removal guide>
<Shape of applying to O-ring and sleeve>
4
If network connection is required from the
controller, connect the Ethernet cable to
LAN port at the backside of the controller
main unit.
5
Connect power adaptor to the power con-
nector located at the backside of the con-
troller main unit.
6
After matching the hook of the wall mount-
O-ring
ing plate installed on the wall and the
sleeve
groove of the product, push the product to
match the groove.
<Groove of the prod-
INSTALLATION AND SETTING
<Wall-mounting
uct>
plate hook>
11
Advertisement
Table of Contents
