Table of Contents
Advertisement
7.11
Updating the software
7.10.2 Step 1: Copying the settings of the correctly-set unit
1. Check whether the settings to be copied on the
original b-touch control panel are all correctly set.
2. Connect the USB flash drive to the USB port of
the b-touch control panel.
n
The control panel detects the USB flash drive and
displays the USB menu
3. Select Export Settings
The progress percentage is displayed.
4. When this has been completed, disconnect the
USB flash drive from the control panel.
7.10.3 Step 2: Copying the settings to another unit
1. Connect the USB flash drive (with the settings
that are to be copied) to the USB port on the other
control panel.
2. Keep the function Import settings pressed down
until the progress of the process is displayed.
The settings are now being imported.
n
3. When this has been completed, disconnect the
USB flash drive from the control panel.
4. Repeat steps 1 to 3 for each control panel to
which you wish to apply the same settings.
Product improvement is continuously ongoing.
It is recommended that you update the
software of the control panel and of the control
circuit board when updates become available.
Consult Schwank's website for availability.
94
Note:
If the USB flash drive is not detected,
disconnect it and then connect it again.
Note:
Below the progress percentage, the name of
the file to be imported is visible:
'settings_export.txt'
Advertisement
Table of Contents
