AEG MC 4410 CD/MP3 Instruction Manual & Guarantee page 34

Remote Control
A II Play/Pause button
B STOP button
C INTRO button
D PROGRAM button
E I / /
(reverse search/forward search)
F REPEAT button (repeat)
Start-up of the device/Introduction
• Read the operating instructions thoroughly before the start-
up!
• Select an appropriate location for the device, e.g. a dry, fl at,
non-slip surface on which the device can be easily operated.
• Make sure that the device is adequately ventilated!
• Connect the loudspeakers to the back of the music centre to
the sockets market „Speaker R and L" (17).
CD deck transport protection
• Please open the CD compartment by pressing the OPEN/
CLOSE button (11).
• Remove the transport protection from the CD player if
present before use.
Power supply
• Insert the plug (18) into a properly installed 230 V, 50 Hz
power socket.
• Please ensure that the mains voltage corresponds to the
information on the type plate.
Inserting the Batteries (not supplied)
• Open the lid of the battery compartment on the back of the
remote control.
• Insert 2 batteries of type R03 „AAA" 1.5 V. Please ensure
that the polarity is correct (see the fl oor of the battery
compartment or the inscription on the outside)!
• If the remote control is not used for a prolonged period,
remove the batteries in order to prevent battery acid leaking.
• Now close the battery compartment.
• Different battery types or new and used batteries must not
be used together.
CAUTION:
Batteries are not to be disposed of together with domestic
wastes. Dispose of the used batteries at the relevant
collection bin or at your dealer's.
WARNING:
Do not expose the batteries to high temperatures or direct
sunlight. Never throw batteries into the fi re. There is a
danger of explosion!
34
05-MC 4410 CD 34
/ I SKIP/SEARCH buttons
General Operation
NOTE:
Some keys are to be found both on the device itself and
on the remote control. Keys with the same designation
have the same function.
Switch-off
The machine is switched off when the function selector switch
(5) is turned to the OFF position. Unplug the device.
Volume
The desired volume can be sent using the VOLUME regulator (8).
PHONES (4)
Insert the plug of a set of headphones into the headphone
socket – the loudspeakers are „muted". If your headphone plug
does not fi t, please use a suitable adapter.
Infrared remote control
For operating the music centre from a distance of up to 5 metres
without a lead. If the range of the remote control is reduced, the
batteries have to be replaced. During operation ensure that there
is nothing blocking the direct line between the remote control
and the sensor (2) on the machine.
Listening to the Radio
1. Turn the function selector switch (5) to the FM or AM posi-
tion.
Medium wave = AM (mono); VHF = FM
2. Tune in the desired station with the station adjustment knob
TUNING (10).
3. The FM.ST control lamp (1) only lights up if the selected
station is being received in stereo quality. If reception is too
weak and there is noise on the station being received, this
lamp will fl icker. Try to improve reception by turning and
bending or twisting and altering the length of the antenna
(16).
4. An aerial is integrated into the device for the reception of
AM stations. The machine can be aligned to the station by
turning it. In this frequency band programs are transmitted in
„mono" only.
Playing CDs
This is how you play a CD
1. Turn the function selector switch (5) to the „CD" position.
2. In order to open the CD compartment, press the OPEN/
CLOSE button (11).
3. Insert an audio CD with the printed side facing upwards on
to the central cone so that the CD clicks into place and then
close the lid of the CD compartment.
4. „- - -" appears in the display (9) followed by the number of
tracks.
03.05.2007, 17:09:38 Uhr