Tajfun EGV 35 A Operating Instructions Manual page 9


Do not stand under the attached load while pulling the load up or down the
slope, even if the load is secured on a tightened rope.

When securing a standing tree, the pulling rope must be attached to the three on
5.
the upper 2/3 of its height, and tensioned before starting the felling process.
Position yourself with the winch outside the dangerous area, at a distance of
twice the height of the tree. If you use a snatch block to reverse the direction of
felling, the dangerous area is up to the distance of the height of a single tree.
When using the snatch block, do not stay in the "danger triangle" or other
dangerous areas!
Logging with a winch
REDIRECTED ATTACHMENT
Logging with a winch
DIRECT ATTACHMENT
L = TREE HEIGHT
9