Cola BETTY Installation, Use And Maintenance Manual

Model wood stove

Advertisement

Quick Links

Installation, use and maintenance
manual
BETTY
model wood stove
48.41.10.011.GB–07/09
Read the instructions carefully before installation and start-up

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BETTY and is the answer not in the manual?

Questions and answers

Summary of Contents for Cola BETTY

  • Page 1 Installation, use and maintenance manual BETTY model wood stove 48.41.10.011.GB–07/09 Read the instructions carefully before installation and start-up...
  • Page 2 4.2 Cleaning the glass 4.3 Cleaning the flue 4.4 Cladding maintenance 5 – TROUBLESHOOTING 5.1 The stove does not work 5.2 Difficult lighting 5.3 Smoke leaks 5.4 The glass gets dirty quickly 6– ENCLOSURES 6.1 Warranty certificate 6.2 "CE" marking information Betty...
  • Page 3: Safety Rules

    In case of operation faults, the stove can only be relit after eliminating the cause of the problem. The manufacturer declines any liability for problems, breakage or accidents caused by failure to follow or apply the instructions contained in this manual. Betty...
  • Page 4: Technical Description

    65 - 145 (depending on house insulation) Max. hourly wood consumption kg/h 1.78 Weight Minimum safety distance (rear-right side-left side) mm (fig.1) 850 x 471 x 480 H x W x D) Dimensions ( Fume exhaust Fig.1 stove dimensions Betty...
  • Page 5: Accessories Supplied

    UNI 10683/98: standard prescribing the installation requirements for heat generators or appliances also intended for cooking food, such as stoves and heating stoves with natural draught on fume side and forced draught with thermochemical power of<35kW using natural wood. Betty...
  • Page 6: Transport And Installation

    For the end-user: Contact your service centre and/or dealer to order replacement parts. For the dealer: To request any replacement parts contact the Cola s.r.l. after-sales service and/or send a fax clearly specifying the following data: - stove model; - serial number;...
  • Page 7: Room Ventilation

    (which goes to the chimney cap) must only enter by a few cm, so M A X 4 5 ° as not to reduce the cross section of the flue. Y E S Fig. 3 stove-flue connection Betty...
  • Page 8: Adjusting The Combustion Air

    To light the fire it is advisable to use kindling and newspaper, or other means available on the market (excluding any solid or liquid flammable and/or explosive substance). The air control on the door, in the ash zone, must be open and is for adjusting stove heat output after the lighting stage. Betty...
  • Page 9 When refitting the pipes take care not to damage enamelled or painted parts and the seals. Dispose of cleaning waste in accordance with the local regulations. Betty...
  • Page 10: Troubleshooting

    The company reserves the right to make technical or aesthetic modifications to the products at any time without notice. The drawings, measurements, diagrams and any other configurations are given only by way of example. Betty...
  • Page 11: "Ce" Marking Information

    "CE" MARKING INFORMATION Cola EN 13240 Solid fuel-burning domestic appliance Solid fuel-burning domestic appliance BETTY Ref. Safety distance from flammable materials 200 mm min. Safety distance from flammable materials CO emission with 13% O2 in fumes 0,407 % CO emission with 13% O2 in fumes Maximum operating pressure Max.

Table of Contents