Related Manuals for Cola BEA oven
Summary of Contents for Cola BEA oven
- Page 1 Installation, use and maintenance manual Wood stove model BEA oven - BEA majolica oven 48.41.12.050.GB – 05/08 Read the instructions carefully before installation and startup Bea oven...
- Page 2 4.5 Cladding maintenance 5 – TROUBLESHOOTING 5.1 The stove does not work 5.2 Difficult lighting 5.3 Smoke leaks 5.4 The glass gets dirty easily 5.5 The oven does not heat 6– ENCLOSURES 6.1 Warranty certificate 6.2 "CE" marking information Bea oven...
-
Page 3: General Information
Unplug the stove before carrying out any maintenance. Cola s.r.l. declines any liability for problems, breakage or accidents caused by failure to follow or apply the instructions contained in this manual... -
Page 4: Technical Description
1.3 Technical description The Bea Oven model wood-burning stove is designed for natural convection home heating. The stove burns firewood and meets the requirements of Standard EN 13240. Structure steel and cast iron Combustion chamber cast iron Nominal heat output 13.31 kW... - Page 5 The burning of waste is prohibited according to European and national laws. The burnt gases produced by the combustion of unsuitable materials can cause damage to the stove and flues, and compromise your health. The use of any fuel not complying with that specified above invalidates the warranty. Bea Oven...
- Page 6 For the end-user: Contact your service centre and/or dealer to order replacement parts. For the dealer: To request any replacement parts contact the Cola s.r.l. service centre and/or send a fax clearly specifying the following data: stove model; serial number;...
-
Page 7: Transport And Installation
2.4 Connection to the flue The BEA Oven wood stove must be connected to the flue with connection supports located at the top of the stove body and by means of flue pipes readily available on the market. Connection to the flue must be made using strong and stable pipes, with recommended thickness of at least 1.2-2 mm. - Page 8 According to Standard UNI 7429, the chimney cap must meet several requirements; above all, it must have a useful outlet cross section at least double that of the flue. It is also advisable to install an "antiwind" cap that guarantees fume exhaust even in the presence of strong horizontal winds. Fig. 4 Chimney caps Bea Oven...
- Page 9 Clean the oven every time it is used, following the instructions given in the section on cleaning. The oven/food-warmer must only be used for their intended purpose, i.e. for cooking food; any other use is improper and potentially dangerous. Bea Oven...
- Page 10 4.1 Removing the ash The BEA Oven model wood stove has an ash pan and a removable grate which should be cleaned of ash, using the poker supplied, every time before loading fuel. Make sure to periodically empty the ash pan, since the accumulation of ash under the grate hinders the flow of combustion air;...
-
Page 11: Troubleshooting
The manufacturer reserves the right to make technical or aesthetic modifications to the products at any time without notice. The drawings, measurements, diagrams and any other configurations are given only by way of example. Bea Oven... -
Page 12: "Ce" Marking Information
"CE" MARKING INFORMATION Anselmo Cola EN 13240 Solid fuel-burning domestic appliance Solid fuel-burning domestic appliance BEA oven – BEA majolica oven Ref. Safety distance from flammable materials Rear - left/right side – floor : 200-200-0 mm Safety distance from flammable materials Rear –...
Need help?
Do you have a question about the BEA oven and is the answer not in the manual?
Questions and answers