Simrad AP48 Operator's Manual page 23

Hide thumbs Also See for AP48:

Table of Contents

•

Turn variables:

- Course change (C)

- Turn radius (D)

Depth contour tracking (DCT)

Makes the autopilot follow a depth contour.

Ú Note:

DCT turn pattern is only available if the system has a valid

depth input.

Warning:

Do not use the DCT turn pattern unless the

seabed is suitable. Do not use it in rocky waters where

the depth is varying significantly over a small area.

To initiate a DCT turn:

•

Ensure that you have depth reading on the panel or on a

separate depth instrument

•

Steer the boat to the depth you want to track, and in the

direction of the depth contour

•

Activate AUTO mode, then select depth contour tracking while

monitoring the depth reading

•

Select the port or starboard option in the turn dialog to initiate

the depth contour steering to follow the bottom sloping to

starboard or to port

Autopilot modes

| AP™ 48 Operator Manual

Table of Contents