ZMU02026
ZMU02334
N
ZMU05533
Trouble Recovery
6.
Insert the knotted end of the emergency
starter rope into the notch in the flywheel
rotor and wind the rope 1 or 2 turn(s)
around the flywheel clockwise.
7.
Pull the rope slowly until resistance is
felt. Give a strong pull straight out to
crank and start the engine. If the engine
does not start on the first try, repeat the
procedure.
NOTE:
If the engine does not start on the first try,
G
repeat the procedure. If the engine fails to
start after 4 or 5 tries, open the throttle a
small amount (between 1/8 and 1/4) and
try again. Also if the engine is warm and
fails to start, open the throttle a same
amount and try to start the engine again. If
the engine still fails to start, see page 36.
Slowly return the throttle grip to the fully
G
closed position so that the engine does not
stall.
EMU32003
Emergency starting engine (electric
start model)
1.
Remove the top cowling.
2.
Remove the dust cover.
ZMU05610
85