Table of Contents
Advertisement
Power requirements
POWER SUPPLY
This unit must be powered with a 9VDC negative tip power
supply with the standard Boss type 2.1mm connector.
Current supply should be a minimum of 100 mA just to
leave a safety margin for the DC adapter.
Make sure you use a good quality power supply and avoid
using generic SMPS type adapters which can induce high
pitched noise to the audio.
CAUTION:
Please note this pedal MUST not be powered with
any voltage above 9VDC. It already has an internal DC/DC
converter to make it work to the adequate tension for it to
work properly and with its max dynamic range. Powering it
up with a 12V or 18V power supply will damage its circuit
and immediately void the warranty.
9
Advertisement
Table of Contents
