Features - Aclam Guitars Windmiller User Manual & Safety Instructions

Features

FAITHFUL RECREATION OF OUR OWN GRAMPIAN
REVERBERATION UNIT TYPE 636 S/N: 1138
We've been lucky enough to find an original unit from the
60's in great shape, so we used it as a reference to make
the most accurate replica of its preamp thus far. We traced
the original circuit and made our own schematic to ensure
you cannot get closer to the real thing!
HEAVILY IMPROVED SIGNAL TO NOISE RATIO AND
INCREASED TREBLE RESPONSE:
As part of the circuit's adaptation to a pedal unit, we have
put an extra effort to make The Windmiller Preamp as quiet
as possible, you almost can't tell it's on even at full gain! In
addition, we have made the circuit a bit brighter, so you have
a greater frequency spectrum on higher frequencies.
HI. CUT AND LO. CUT TONE SHAPING CONTROLS:
To make The Windmiller Preamp more versatile we have
included tone cut controls for high and low frequencies,
which are extremely useful when using on different amps
and guitars. Single coils, humbuckers, El84's, 6l6's...
It will match any rig!
6
PREAMP OR CLEAN BOOSTER? IT'S UP TO YOU!:
Due to its low input impedance The Windmiller Preamp
will react in different ways depending on the signal source
you connect it to. Plug it straight to your guitar before
any other device and you will be delighted by its unique
coloring. Put it after a buffer and you will get a super
transparent and linear booster with the addition of the Lo
Cut and Hi Cut controls!
OVERLOAD INDICATOR LAMP:
We couldn't resist ourselves to put this cool feature of
the original Grampian 636 thus it will be very useful as a
signal monitor!
CIRCUIT TAILORED FOR BOTH BASS AND GUITAR
INSTRUMENTS:
Since the Grampian 636 was designed as a studio tool
you can use The Windmiller Preamp with any kind of
instrument. Guitar, bass, keys... you are the limit!