Safety Instructions; External Antenna; Connection To The Amplifier; Mains Power Connection - Pro-Ject Audio Systems Box Design BT Box S2 Instructions For Use Manual

Dear music lover,
Thank you for purchasing this Pro-Ject Audio Systems BT Box S2.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to connect/disconnect the unit from the mains. Make sure that the power supply
is easily accessible at all times. Never handle the device, the power supply while your hands are wet or
damp. Avoid letting liquids enter the device or the power supply. Never place any item containing
liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power
supply. Never place any naked flame sources, such as lighted candles on or near the device. The product
shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar
conditions.
Connectors
Make all connections whilst the converter is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the
left channel black or white.
Never use any other power supply than the one supplied with the unit.

External antenna

Connect supplied antenna to the connector on the back side of the unit.
Use only supplied antenna

Connection to the amplifier

Connect the Out sockets to a line input (such as AUX) on your amplifier. Alternatively it is possible to use Digital
Optical output to connect the unit to a D/A converter or to a digital input of your amplifier or AVR.

Mains power connection

Connect the low voltage plug from the power supply to the Power 5VDC socket before connecting the power
supply to the mains.
2
© Pro-Ject Audio Systems · Pro-Ject BT Box S2 · Revision 2021.04.22