Safety Instructions; Connectors; External Antenna; Mains Power Connection - Pro-Ject Audio Systems Remote Box S2 Instructions For Use

Hide thumbs Also See for Remote Box S2:

Table of Contents

Dear music lover,

Thank you for purchasing a Pro-Ject Audio Systems Remote Box S2.

In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse

Important notice

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the

voltage in your area meets the voltage requirements printed on the power supply.

The power supply is used to connect/disconnect the unit from the mains. Make sure that the power supply

is easily accessible at all times. Never handle the device, the power supply while your hands are wet or

damp. Avoid letting liquids enter the device or the power supply. Never place any item containing

liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power

supply. Never place any naked flame sources, such as lighted candles on or near the device. The product

shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar

conditions.

Connect supplied antenna to the connector on the back side of the unit.

Connect the low voltage plug from the power supply to the Power 5VDC socket before connecting the power

supply to the mains.

Table of Contents

Do you have a question about the Remote Box S2 and is the answer not in the manual?