Advertisement
Quick Links
CEILING SURROUND ENSEMBLE
Model Nos. "CEIL-E3, and CSENSD3"
These instructions present ideas on how to mount the Ceiling
Surround Ensemble products flush to the ceiling.
These products can be mounted close to the overhead projector or
any other location requiring sound support as long as there is an
available power outlet nearby.
These powered speakers are capable of filling 2,000 square foot
rooms with highly intelligible and distortion-free sound when
mounted correctly. For larger rooms use two or more CSENS
speakers.
Ceiling (or projector) Installation:
WARRANTY: Do not remove or modify the speakers from their
brackets or try to mount them to brackets that are not
approved by Cetacea Sound Corp.
Removing the bottom heat sink from any Ensemble product will
invalidate the warranty. To find out which brackets are
approved, please call us at 800-556-1922 and ask for Tech
Support. You may also visit our web site.
LIMITED LIABILITY:
liability for the use of unapproved brackets.
7rmf-csens(d3)(e3)
QUICK START GUIDE
Cetacea Sound Corp assumes no
Read these instructions closely.
OVER
Advertisement
Related Manuals for Cetacea Sound CEIL-E3
Summary of Contents for Cetacea Sound CEIL-E3
- Page 1 QUICK START GUIDE CEILING SURROUND ENSEMBLE Model Nos. “CEIL-E3, and CSENSD3” These instructions present ideas on how to mount the Ceiling Surround Ensemble products flush to the ceiling. These products can be mounted close to the overhead projector or any other location requiring sound support as long as there is an available power outlet nearby.
- Page 2 “JAZZ”, “ROCK”, “BLUES”, etc., turn them off! These artificial special effects cause distortion and frequency compression. 4. The CSENS speakers require power from the Cetacea Sound Corp approved “Power Adapter/Conditioner”. Plug the power adapter into a suitable source of 110/220v power. Plug in the source, DVD, projector or personal computer first and then plug the small 5.5mm barrel connector of the...
- Page 3 7rmf-csens(d3)(e3)