Advertisement
CEILING SURROUND ENSEMBLE
Model No.'s "CEIL-E3, and CSENSD3"
Connections and Set-up
1. There are 3 mini-jack (3.5mm) inputs on the base of the speaker for mixing
multiple sources of sound.
2. Do not adjust the volume on the source(s) i.e. computer, VCR or CD player
above 75 %, often times this equipment is distorted at high volume levels. If
your VCR/DVD player does not have variable volume outputs, you will need
a mechanical volume control like the Cetacea part AB-163. Contact your
dealer for more information.
3. If your source has "BASS BOOST", Spatializer, SRS, or other controls that
say "JAZZ", "ROCK", "BLUES", etc., turn them off! These artificial special
effects cause distortion and frequency compression.
4. The CSENS speakers require power from the Cetacea Sound Corp approved
"Power Adapter/Conditioner". Plug the power adapter into a suitable source
of 110/220v power. Plug in the source, DVD, projector or personal
computer first and then plug the small 5.5mm barrel connector of the
power supply into the base of the speaker where indicated. (It will only
fit in one location.)
Note: These speakers uses "conditioned" power. Use of
unapproved power adapters will invalidate the warranty.
5.
Once inputs are established and the power supply is connected, turn on the
music. Be sure to use a high quality recording to fully appreciate the
awesome sound of these speakers. Once you are satisfied with the sound,
notice the source level so you can repeat this same sound stage with the
audience in the room. The larger the audience the better it sounds!
In order to obtain maximum enjoyment from this exciting new audio system, visit
our web site and print copies of our application guides, room drawings and
spec sheets to learn how to make a lasting impression with your audience.
The spec sheet for this product is labeled ENS-60-3, page 1 and page 2 on our
If you have questions, call Technical Support at 800-556-1922.
literature page.
www.cetaceasound.com
Advertisement
