Cetacea Sound CART-ENS-903 Quick Start Manual

Cetacea sound cart-ens-903: quick start

Hide thumbs Also See for CART-ENS-903:

QUICK START GUIDE

CART SURROUND ENSEMBLE

Model No. "CARTENS-903"

These instructions present ideas on how to mount the Cart Surround

Ensemble products (CSENS) to a video cart.

These products can be mounted close to a video monitor because they are

shielded.

These powered CSENS speakers are capable of filling

1,500 square foot rooms with highly intelligible and

distortion-free sound when mounted correctly.

Cart Installation:

WARRANTY: Do not remove the CSENS speakers

from their brackets or try to mount them to brackets

that are not approved by Cetacea Sound Corp.

Removing the bottom heat sink from any CSENS or

Ensemble product will invalidate the warranty. To

find out which brackets are approved, please call us

at 800-556-1922 and ask for Tech Support. You may

also visit our web site.

Cetacea Sound Corp assumes no

LIMITED LIABILITY:

liability for the use of unapproved brackets.

Read these instructions closely.

OVER

Table of Contents

Do you have a question about the CART-ENS-903 and is the answer not in the manual?

Page 1 WARRANTY: Do not remove the CSENS speakers from their brackets or try to mount them to brackets that are not approved by Cetacea Sound Corp. Removing the bottom heat sink from any CSENS or Ensemble product will invalidate the warranty. To find out which brackets are approved, please call us at 800-556-1922 and ask for Tech Support.
Page 2 1. There are 3 mini-jack (3.5mm) inputs on the base of the speaker for mixing multiple sources of sound. 2. The CSENS speakers require power from the Cetacea Sound Corp approved “Power Adapter/Conditioner”. Plug the power adapter into a suitable source of 110/220v power. Plug in the source, DVD, projector or personal computer first and then plug the small 5.5mm barrel...