Valhalla Scientific 4176 Operation Manual page 53

RESET COMMAND
Executes a soft reset of the ADuC834 processor system.
Syntax:
Response:
Example:
Response:
Notes: Resetcpu() executes as soft reset of the system by "nicely" changing the return
stack function and popping it. Expect a 500ms delay after receiving the linefeed before
transmitting next command.
*RST COMMAND
Sets buffers to power on default.
Syntax:
Response:
Remote command buffer, Serial I/O, history, statistics, stability
SAVSETUP COMMAND
Stores current RAM setup data in NV RAM.
Syntax:
SAVSETUP? QUERY
Refreshes the current Setup from NV-RAM and then sends it to the remote port.
Syntax:
Response:
RESET
Front panel display show soft reset initiation. "RESETTING" is displayed
flashing inverse mode for 300ms while all system configurations are
returned to power up default.
RESET<crlf>
<crlf>
*RST<crlf>
<crlf>
SAVSETUP<crlf>
SAVSETUP?<crlf>
FF EE DD CC BB AA 99 88 77 66 55 44 33 22 11 00<crlf>
FF EE DD CC BB AA 99 88 77 66 55 44 33 22 11 00<crlf>
FF EE DD CC BB AA 99 88 77 66 55 44 33 22 11 00<crlf>
. . . . . . . . . . . .BB AA 99 88<crlf>
51