BOMANN VS 194 User Manual page 20

The following problems can be solved by you by checking for the possible cause.
PROBLEM POSSIBLE CAUSE
The device is Is the plug securely connected to the
not working mains? Has the safety mechanism of the
properly or at wall socket been triggered?
all Is the temperature control properly set?
Is the place unqualified?
Do food items or shelves and/or drawers
prevent the door from closing properly?
Is the ventilation of the device hedged?
Loud noise Does the device not stand vertical or hori-
during opera- zontal?
tion
Water on the Is the temperature control set properly?
bottom Is the condensate flume clogged?
Interior lamp Is the plug not connected to the mains?
does not Has the safety mechanism of the wall
work socket been triggered?
Is the illuminant defect?
Note. On days of high humidity, condensation might occur on the outer surface of the device. This is
no malfunction; you may simply wipe the water off.
If a problem still persists after following the steps above, please contact your distributor or a technician.
Are you interested in other Bomann products? Please visit our website:
Distribution: C. Bomann GmbH • Heinrich-Horten-Str. 17 • D-47906 Kempen
SOLUTION
Connect the plug properly to the socket,
turn on the fuse, and contact a technician if
necessary.
Check the settings.
Check the ambient temperature.
Arrange the food or shelves and/or drawers
properly.
Clear the ventilation slits, install the device
freely
Adjust the feet accordingly.
Liquid flow sounds in the cooling circuit are
normal.
Check the temperature settings.
Clean the discharge opening with a pipe
cleaner or knitting needle.
Connect the plug properly to the socket,
turn on the fuse, and contact a technician if
necessary.
Disconnect the plug and replace the illumi-
nant (refer to chapter "Replacing the illumi-
nant").
www.bomann.de
9
01/2012