View 7 - Panasonic VIEW 3 Product Family Specification & User Information Manual

View Tag Product Family
User Information Guide

VIEW 7

Step 1 Remove the outer window
Outer Window is adhered to plastic case with adhesive.
Pry up at edges of window using a flat blade.
Step 2 Remove the screws
Remove the 6 screws as shown using a T8 Torx screwdriver.
Step 3 Remove the case top
The case is held in place using snap features in the plastic part.
Pry up between case bottom and top using flat blade screwdriver.
Step 4 Remove Circuit Board Assembly
2.2.2021 Document: SPC-ENG-0000004-03 page 18 of 19