GPIO Port
The View Tag product line features a proprietary GPIO port allowing the user to attach various optional expansion modules. This feature allows
the tag increased functionality that can be tailored to fit the needs of your operation.
Connections
Output
Input
Data
Pinout Reference
System/View Tag Interaction
The Panasonic View Tag product line has embedded firmware allowing interaction with two separate administrative software packages. Utilizing
the features in these applications, an administrator can interact with any specific tag or several at once depending on intent. Some of the most used
features include:
➢ Determine what information is displayed by which tags
➢ Edit information displayed, in real-time
➢ Set Tag parameters including:
• LED function attributes
• Passive and Responsive Communication Parameters
• Image display
Retrieve information about the Tag including:
➢
• Temperature
• Battery Level
• User interaction information
(These are a few examples of the functionality when using a View Tag. To learn more, refer to your system-specific user guide)
2.2.2021
(internally current limited)
(use only with normally open switch to save battery power)
3.3V logic signal only
See Pinout Table below
Figure 14
GPIO Pinout
Pin
Description
1
GPIO OUT
2
GPIO IN
3
GROUND
4
DATA
Document:
SPC-ENG-0000004-03
View Tag
Product Family
User Information Guide
Input (x1)
Output (x1)
Data Line (x1)
Shared Ground
24V @ 0.1A
24V max
(NOT 24V TOLERANT)
Type
OUT
IN
GND
IN/OUT
page
9
of
19