Bracket Mounting; Mounting Position; Mounting Options - Panasonic VIEW 3 Product Family Specification & User Information Manual

Tags
Table of Contents

Advertisement

Bracket Mounting

Mounting Position

The features of the View Tag product line are designed with human interaction in mind. To maximize ease of use, and
minimize fatigue and/or strain, the following mounting instructions are recommended for standard use:
(shown in Figure 15)
➢ Mount display no higher than 2 meters. this will allow users to easily read
➢ Mount display no further than 1 meter from user, so the user does not have to bend or reach and has
comfortable, unobstructed access to View Tag features
➢ View Tags may be mounted vertically in either orientation or facing upward. They should not be mounted facing
downward.
These orientations are acceptable.
(depending on factors like user's physical abilities, facility layout, and physical obstructions, some accommodations may need to be made to utilize all
features. These circumstances are to be handled at client's discretion)

Mounting Options

To mount your bracket, there are two options each with its own hardware necessary for implementation:
➢ Screws
• The bracket features pre-drilled holes to aid in fastening your bracket to the mounting surface
• Screws are recommended when affixing bracket to a flat, rigid surface
• The holes are sized to accommodate either of the following industry standard screw sizes
⊳ 8-32 UNC Socket Head Cap Screw
Torque Spec: 10-12 in-lb
⊳ M4 x 0.7 Socket Head Cap Screw
Torque Spec: 1.13-1.36 N·m
➢ Zip-Ties
• The bracket features slots on each side of the bracket
• Zip-Ties are recommended for mounting brackets to uneven or non-flat surfaces
When mounting the View Tag, please observe the following:
Avoid installing where there is excessive shock or vibration
Check the fixation regularly
Do not drop the unit as it may cause malfunction
Do not use the system outdoors
Be sure to use the product without the specified ambient temperature and humidity as defined
in the previous section
2.2.2021
Document:
SPC-ENG-0000004-03
View Tag
Product Family
User Information Guide
This orientation is
NOT
acceptable.
Figure 15
page
10
of
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

View 3 bracketView 3 cmView 4View 4 bracketView 4 cmView 7 ... Show all

Table of Contents