Carmanah M650H User Manual page 32

The following section describes the various parts of the 650 Device Manager screen:
TOP BAR
FUNCTION PAGE
BOTTOM BAR
32
The Top Bar is the blue area at the top of the window. It always contains the following
information boxes:
Battery Health: This gives you a quick snapshot of the battery's current state of health:
Good: the Battery Pack is healthy, and charged (>4.2V). A Battery Pack in this state is
ready for deployment.
Charge: the Battery Pack needs to be charged, but is otherwise healthy (battery voltage
between 3.9V and 4.2V).
Low: the Battery Pack voltage is so low (<3.9V) that low battery cutoff is active the
M650H will not light up dusk arrives.
Replace: the Battery Pack should be recycled, and replaced with a new one.
Ship Mode: This indicates if the lantern is currently in Ship Mode (e.g. Ship Mode: On).
Disconnected/(Model Name) Connected: This indicates the 650DM connection status.
If your computer is not connected to a lantern, it displays Disconnected. When connected
to a lantern, it displays the lantern's model name.
Login Here/Logout (Access Level): Click this button to log out of 650DM. The name
in brackets indicates the access level of the user currently logged in to the device
(User, Distributor, or Manufacturing).
The centre area of the screen contains the Function Page information. Different content
appears in this area, depending on the button you select from the Bottom Bar.
The Bottom Bar contains buttons that allow you to access the software's various function
pages. As a User, you can access the following pages:
Status: (the default page when you log in): This page contains basic status information
about the M650H that is currently plugged into the computer.
Configuration: This page displays the attached lantern's current configuration, and allows
you to change various settings (for example, Flash Code and Effective Intensity).
SW Admin: This page has two tabs: the Connection Tab (which allows you to view your
current Connection Status, Com Port address, and 650DM version number), and the
Security Tab (which allows you to change passwords).
Exit: Click Exit to end your current session and close the 650DM software.
© 2014, Carmanah Technologies Corporation. June 2014. 61249_M650H_User_Manual_RevC
M650H USER MANUAL