Carmanah M650H User Manual page 24

battery strap tab
24
4. Insert a finger under the Battery Pack ribbon,
and lift the Battery Pack out. Be careful not to
pinch any wires between the Battery Pack and
the housing body.
To install the Battery Pack, follow the steps above
in reverse. Take care not to pinch any of the wires
when seating the Bottom Cover after inserting a new
Battery Pack.
NOTE
© 2014, Carmanah Technologies Corporation. June 2014. 61249_M650H_User_Manual_RevC
M650H USER MANUAL
When installing a new battery, press
and hold the Set button as you
insert the battery connector into
the M650H receptacle. Continue
to hold the Set button until Zero
is displayed briefly. This resets
the M650H's Battery Pack health
monitor. Do not hold the Set button
while reconnecting a used battery.