Table of Contents
Advertisement
Attach the Faceguard
Follow the steps 1-4 to add the batteries (batteries are not included in the package). Refer to
the Battery Details section of this guide.
1.
With a small screwdriver remove the screw on the battery cover on the
faceguard.
2.
Remove the battery cover from the top of the battery compartment.
3.
Insert two AAA batteries in their correct polarities.
4.
Replace the battery cover over the battery compartment and fasten with the
screw you removed in step 1.
5.
Plug the light wire connector on the faceguard into the connector on the vehicle.
6.
Insert the tabs on the faceguard into the slots on the vehicle.
Advertisement
Table of Contents
