Page 4
Steps to buckle the harness Engage the buckle connecter until it clicks.
Page 5
Exit two shoulder straps from the harness connector at the back Pull the shoulder straps out of the harness connector as picture shown; of the child seat. Pull the shoulder straps out of the slot in front of following the order ①②③, exit two shoulder straps from the harness the child seat, remove chest pad and infant insert.
Page 6
Step 3: Fasten the shoulder belt in the shoulder-belt slots at the back of the body. Place infant insert back to the car seat. Step 1: Adjust the seat to rear Step 2: Remove infant insert, pass facing position (position 3), place the waist belt over seat slots, and the child seat on the car seat and Step 2: Pass waist belt through...
Page 7
Step 3: Fasten buckle and pull the vehicle belt to tighten. Check the height of the harness is in the correct position and then fasten the buckle. Position shoulder belt through shoulder belt guide, pass waist belt through seat slots. Fasten buckle and pull the vehicle belt to tighten.
Need help?
Do you have a question about the NEXUS and is the answer not in the manual?
Questions and answers