Download Print this page

Crolla AURA Instruction Manual

Child safety restraint group i/ii/iii

Download this manual

MODEL: AURA

Group I/II/III

Need help?

Do you have a question about the AURA and is the answer not in the manual?

Page 1 MODEL: AURA Group I/II/III...
Page 4: Vehicle Application
Vehicle application Correct fitting/suitable Not to be used on this seat if a Passenger front airbag is active. I n c o r r e c t f i t t i n g / n o t s u i t a b l e Only use on this seat if a lap and diagonal seat belt is fitted.
Page 6 Step 1: Put two metal sections of the buckle connector together. Step 2: Engage the buckle connector until it clicks. Press down the button as you grip the two shoulder straps with your other hand. Pull the shoulder straps towards you to loosen the harness.
Page 7 Step 2: Thread the car seat belt passes through the cushion of the backrest of the car seat following the seat belt route. Put the car safety belt tongue into the car buckle.
Page 8 Step 3: Pull the vehicle safety belt and pass through the belt path, and then buckle it up. Position shoulder belt through the shoulder belt guide as shown in photo. Step 4: DO NOT position vehicle belt over top of the armrests. It must pass underneath the armrests.
Page 9: Cleaning And Maintenance
Cleaning & maintenance These instructions are important.Please read carefully and European safety child seat is sweeping the whole world now retain for future reference. Removing the cover of car seat. Open the snap button in the headrest and take out of the cushion. All cushion can be removed by pulling out the cushion.