Rear View Mounting Pattern For U650Cv-Ums; Side Control Buttons - Sceptre UMS Series Manual

Rear View Mounting Pattern For U650CV-UMS

Mounting Specification: 400mm x 400mm using 4 screws sized at M6 (not included).
Length of screw should not exceed 20mm. Please Note: The 20mm length of screw
refers to how deep the screw can go inside the mounting holes. When you're buying
screws, you should add the original 20mm to the thickness of your mounting plate in
order to get the total screw length.

Side Control Buttons

VOL(+) – This button increases the display's volume. If a sub-menu
1.
is active, pressing this button will move the select right.
VOL(-) – This button decreases the display's volume. If a sub-menu
2.
is active, pressing this button will move the selection left.
3. CH(
active, this button functions as up for the menu.
4. CH(
is active, this button functions as down for the menu.
5.
menu is active, pressing this button will exit the OSD.
6.
display. When the OSD is active, this button acts as the enter
button and confirms the menu selection.
7.
button again to turn off the display.
▲
) – This button changes the display channel up. If the OSD is
▼
) – This button changes the display channel down. If the OSD
– This button activates the On Screen Display (OSD). If a sub-
– This button switches between all the different sources of the
– Turn on the display by pressing the button once. Press the
- 17 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual