Table of Contents
Advertisement
INSTRUMENTS and CONTROLS
1
LIGHTING RHEOSTAT
With the lights on, press the button
to vary the intensity of the lighting of
the instruments and controls. When
the lighting reaches the minimum
(or maximum) setting, release the
button then press it again to increase
(or reduce) the brightness.
As soon as the lighting is of the required
brightness, release the button.
28
TRIP COMPUTER
or
TRIP (Route): access to
the trip computer displays.
Each successive press on the button
located at the end of the wipers stalk
displays different information.
-
the ''vehicle'' tab with:
consumption
-
the route ''1'' tab with:
consumption,
-
the route ''2'' tab with:
consumption,
for the second route.
The routes
The routes ''1'' and "2" are independent
but have identical application.
Route ''1'' for example allows you to
make daily calculations and route ''2''
monthly calculations.
Zero reset
When the required route is displayed,
press
the
control
for
more
two seconds.
than
Hide quick links:
Advertisement
Table of Contents
