Table of Contents
Advertisement
CHANGING A FRONT BULB
Handle the bulbs with a dry cloth.
Front lights
In the engine compartment, remove
the cover secured by one or two but-
two quarter turn screws.
1 - Dipped
beam
headlamps:
H1-55 W or D2S-35 W xenon bulb.
WARNING: RISK OF
ELECTROCUTION
Xenon bulbs must be replaced by a
PEUGEOT dealer.
2 - Main beam headlamps: H7-55 W.
Remove the protective cover cor-
responding to the faulty bulb.
Disconnect the connector.
Press the end of the securing clips
to free the bulb. Change the bulb.
the direction notches are positioned
correctly and the securing clips are
Reconnect the connector.
3 - Side lights: W 5 W.
Remove the protective cover, dis-
connect the connector and then
remove the bulb and change it.
Put the connector back in place.
Reconnect the connector.
4 - Direction indicators:
PY 21 W (amber).
Turn the bulb holder a quarter turn
and remove it.
Change the bulb.
Amber coloured bulbs (direction
indicators and side repeaters)
must be replaced with bulbs
colour.
PRACTICAL INFORMATION
5 - Front fog lamps: H11 - 55 W.
Turn the wheels to full lock.
Consult a PEUGEOT dealer.
bonate glass with a protective coating.
Do not clean them with a dry or abra-
sive cloth, nor with a detergent or sol-
vent product.
wash-wipe and headlamp wash reser-
voir is of good quality.
High
when using a high pressure
washer on stubborn dirt, do
not persist on the headlamps,
the lights and their periphery to avoid
damaging their coating and their seal.
In certain climatic conditions (low tem-
perature, humidity), condensation on
the inside surface of the headlamp
glass and rear lights glass is normal;
it disappears a few minutes after the
lights are switched on.
10 10
pressure
washing :
115
Hide quick links:
Advertisement
Table of Contents
