Table of Contents
Advertisement
Important Safety Information
WARNING Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
1. Work area safety
a. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b. Keep children and bystanders
away while operating the tool.
Distractions can cause you to lose control.
2. Personal safety
a. Stay alert, watch what you are
doing and use common sense when
operating the tool. Do not use while
you are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while operating the
tool may result in serious personal injury.
b. Wear ANSI-approved safety goggles and
heavy-duty work cloves during use.
c. Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
tool in unexpected situations.
d. Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
3. Tool use and care
a. Do not force the tool. Use the correct
tool for your application. The correct tool
will do the job better and safer at the
rate for which it was designed.
SAVE THESE INSTRUCTIONS.
Item 5907
For technical questions, please call 1-888-866-5797.
b. Store idle tools out of the reach of
children and do not allow persons
unfamiliar with the tool or these
instructions to operate the tool. Tools are
dangerous in the hands of untrained users.
c. Maintain tools. Check for misalignment
or binding of moving parts,
breakage of parts and any other
condition that may affect the tool's
operation. If damaged, have the tool
repaired before use. Many accidents
are caused by poorly maintained tools.
d. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely
to bind and are easier to control.
e. Use the tool in accordance with these
instructions, taking into account the
working conditions and the work
to be performed. Use of the tool for
operations different from those intended
could result in a hazardous situation.
4. Service
a. Have your tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that
the safety of the tool is maintained.
5. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by
the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
Page 3
Advertisement
Table of Contents
