Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
1997 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15c
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Central Machinery 5907
Summary of Contents for Central Machinery 5907
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Specifications
Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 5907... -
Page 3: Important Safety Information
It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS. Item 5907 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Setup Instructions
3. Drill the holes straight down, large enough to allow your mounting hardware to fit. 4. Put the Press Brake in place and mount using the hardware. Tighten all hardware securely before use. Page 4 For technical questions, please call 1-888-866-5797. Item 5907... - Page 5 When forming a smaller box or pan, choose the desired size Upper Die, center it and remove the others. Item 5907 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 If the Blade is bowed in towards the back of the tool, turn the adjustment Nut clockwise. This will loosen the Supporting Plate and pull the middle of the Upper Blade in while pushing its ends out. Page 6 For technical questions, please call 1-888-866-5797. Item 5907...
-
Page 7: Workpiece And Work Area Set Up
4. Rotate the Handle (18) until the desired 3. While holding the material steady, rotate the angle has been formed. Use a protractor or Handle until the material has been cut. other measuring tool to ensure accuracy. Item 5907 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Handle Assembly. Figure 11 For cones, move one side of the stock out farther than the other for every bend. Page 8 For technical questions, please call 1-888-866-5797. Item 5907...
- Page 9 Allow the completed side to extend just 2. Place the workpiece so that it is beyond the Die. Bend the second side. centered under the Press Plate. 3. Rotate the Handle (18) to press the workpiece. Item 5907 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Maintenance And Servicing
2. Regularly grease all moving parts. 3. AFTER USE, wipe external surfaces of the tool with clean cloth. Page 10 For technical questions, please call 1-888-866-5797. Item 5907... -
Page 11: Troubleshooting
Rolled shape uneven Rollers misaligned. Check and align rollers. from one end to the other end. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 5907 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Parts List
Back Pressing Roller Hex Wrench 8mm Roller Adjuster Knob Hex Wrench 5mm Handle Knob Hex Wrench 6mm Adjusting Screw Nut M12 Roll Bushing Washer Gear Nut M10 Lower Pressing Roller Bolt Page 12 For technical questions, please call 1-888-866-5797. Item 5907... -
Page 13: Assembly Diagram
Assembly Diagram Item 5907 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Please Read The Following Carefully
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 5907... - Page 15 This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Item 5907 For technical questions, please call 1-888-866-5797. Page 15...
- Page 16 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797...
Need help?
Do you have a question about the 5907 and is the answer not in the manual?
Questions and answers